Cut the batting so it overhangs the seat by about 3 in. and the fabric so it overhangs by 4 in. Then stretch and staple the fabric (Photo 1). There are a few ways to deal with seat corners. Photo 2 shows the method I find easiest. Don’t worry about mistakes—the nice thing about upholstery work is that you can always pry out staples and fix mistakes. To fasten the seat to the cabinet, drive screws through the cabinet and fillers and into the seat.
This plant stand is a really easy build and it looks so professionally done when it’s finished. You can use this to display your favorite plants and keep them close to the window for the sunlight that they need. You need about four 2X4s and some other supplies to build it. It’s a pretty easy project – you can have it finished in just a couple of hours, including paint and stain time. And, it only costs around $10 to make.
Here’s a great project for using up those 2X4s – build yourself a farmhouse kitchen table! I love this entire project. It’s a relatively easy build and I just adore the thought of a huge kitchen table where family and friends can gather. If you’ve ever wanted to bring some serious farmhouse style into your home décor, this is your chance. And, you’ll save hundreds by building it yourself instead of buying it.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
This mirrored coffee table is sure to be a great addition to your living room. It’s also a really easy project to build and the end result is absolutely stunning. You’ll need an old mirror, maybe from a dresser that you don’t need any longer. This one lets you use up some of those 2X4s and repurpose some old furniture at the same time. It should cost you less than $50 to make – as opposed to buying it in a furniture store for a couple hundred.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
First, screw the face frames of the two cabinets together. Drill pilot holes and drive screws through the lower face frame into the upper. Then lay them on one side and hold a straightedge across the fronts of the face frames to be sure they form a straight, flat surface. I had to slip a strip of cardboard between the two cabinet boxes to get the face frames aligned.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc—inside the traced circle—then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.

Screw the cabinets first to the base, driving screws from inside the cabinet boxes (see Figure A). Then set the top in place and fasten it the same way before adding the back panel (S). Measure between the cabinets and subtract 1/8 in. to determine the width of the shelves. To make the shelves, glue banding to a long piece of plywood and rout it with a round-over bit, just as you did to make the top. Then cut the plywood into sections. The shelves rest on adjustable supports. I drilled 2-in. holes into the extension frames for cables to exit behind the stand. Those holes also provide a nook to stuff excess wires into. Next, disassemble the stand for finishing. I applied two heavy coats of Minwax Ebony stain followed by two coats of Minwax Wipe-On Poly. Later, with the stand assembled and in place, I drove a single screw through the top cleat (T) into a wall stud—insurance against tipping forward.


If you’ve ever dreamed of having a farmhouse style bedroom, this 2X4 nightstand is a must. It’s such an easy little stand to build and it really does give off that great rustic country vibe. You only need three 2X4s to make it, too – and at less than $10 each, that’s way less than you would pay for a designer farmhouse nightstand. You can afford to put one on each side of the bed!
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.
If you have ever wanted to build your own furniture or home decor, I have a wonderful treat for you. I’ve found 50 home decor and furniture ideas that you can make from 2X4s. The wonderful thing about this project list is you don’t have to have a lot of woodworking experience or expensive supplies to create beautiful pieces for your home. 2X4s are really cheap. In fact, they’re among the cheapest pieces of lumber that you can find. Head off to Lowe’s or your favorite home improvement store and you’ll find that these boards are only about $3 for an eight foot board. You can make so many wonderful things with those inexpensive boards, and I’m going to show you how.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
Here’s another great way to add some whimsical décor to your home and use up those 2X4 blocks at the same time. You can make them into penguins! These little guys are perfect for dressing up your home for the holidays and you can leave them out all winter long. You’ll need blocks of wood and then black and white paint to make the penguin design. This is a great project for the kids to help with – they’ll have a blast creating their own little unique penguin.

MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this email to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.

Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
Now you’re ready to glue and nail on the legs and rails (Photo 2). Glue front leg parts (L, M and N) together, then add them to the cabinet. The top rail (T) is too thin to nail to the face frame, so just nail it to the center stile (S) and clamp it in place until the glue sets. Then remove the doors, finish-sand the whole chest and add the top, which is just two layers of plywood edge-banded and glued together (Photo 3).

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.


If you’re looking for a way to instantly change how your bathroom looks, this DIY open shelf vanity that you may from 2X4s is a great start. I love the open shelf look for so many reasons. Those large baskets will perfectly hold your makeup and other toiletries and the shelves are great for keeping extra towels and other necessities right there at your fingertips. It’s also the perfect vanity if you like those bowl type sinks. Plus, this is an easy build – you can have it completed in just a few hours.
This outdoor couch will take a few 2X4s – about 11 of them to be exact but at less than $10 each for the boards, it will still cost you less than anything you can get at a patio or furniture store. And, it’s a really sturdy couch. The best part? You can completely build this couch in less than four hours. Once you’ve finished, just add those homemade couch cushions and you’re all set to relax in the backyard.
From the image above it seems that you do not require a big tutorial to help you to build this candle holder. All you need is a wood panel, a hook and some nails/screws and do exactly what you see in the picture. Attach the hook to the wood panel using two screws and then, attach the panel to the wall using more nails or screws. That’s it. I hope this gets the job done.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
×