We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
You can simply check out these amazingly genius 60 Easy DIY Wood furniture projects that involve the mind-blowing tips and tricks to get crafty with old wood for some amazing DIY furniture recoveries! The mind-blowing DIY furniture samples given in the collection will also leave a great spell on the wood crafting lovers as they are amazingly creative, super functional and smartly made!
Add some beauty and charm to your dining room table and use up those scrap 2X4 pieces at the same time. This centerpiece is so easy to make and it is absolutely gorgeous when it’s finished. It’s just a little box that you build from your scrap 2X4 pieces. Once you stain it, and maybe distress it a bit, and add your vases, it transforms into a beautiful centerpiece that has a really nice rustic look to it.
When neither paint nor a two-tone look is suitable, I buy unfinished stock cabinets like the ones shown in this article. Home centers usually carry one style only and one wood species only (typically oak). For the projects shown here, I used 12-in.-deep “upper” cabinets. The cabinets you find may not be exactly like mine, so you may have to alter the measurements given in my plans.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
After building a beautiful residence, the very first desire is to put furniture inside of it so that we can operate well its different living sections and portions according to consent! Buying furniture has always been expensive and now we can shake hands with the amazing DIY projects to get incredibly cost-efficient deals of your favorite and daily usable furniture!
I’ve always wanted to make my own barstools. I just can never seem to find the ones that I want, which is why I love this 2X4 project idea. You can make your own set of barstools with just a few boards and then paint or stain them however you need to so that they match your home décor. I love this idea for its uniqueness and for how really simple it is to do.
Here’s another great way to add some whimsical décor to your home and use up those 2X4 blocks at the same time. You can make them into penguins! These little guys are perfect for dressing up your home for the holidays and you can leave them out all winter long. You’ll need blocks of wood and then black and white paint to make the penguin design. This is a great project for the kids to help with – they’ll have a blast creating their own little unique penguin.
Turn those 2X4s into amazing gifts for your kids’ teachers. Just cut them into blocks, maybe add some design with scrapbooking paper and then a nice little quote fit for a teacher. These are so cute and since the boards cost less than $10 each – and you get about four blocks from each board – you’re getting a unique gift for teacher for less than $3 each!

Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
This mirrored coffee table is sure to be a great addition to your living room. It’s also a really easy project to build and the end result is absolutely stunning. You’ll need an old mirror, maybe from a dresser that you don’t need any longer. This one lets you use up some of those 2X4s and repurpose some old furniture at the same time. It should cost you less than $50 to make – as opposed to buying it in a furniture store for a couple hundred.
×