Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.

This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
Turn those 2X4s into amazing gifts for your kids’ teachers. Just cut them into blocks, maybe add some design with scrapbooking paper and then a nice little quote fit for a teacher. These are so cute and since the boards cost less than $10 each – and you get about four blocks from each board – you’re getting a unique gift for teacher for less than $3 each!
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc—inside the traced circle—then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.

This potting bench is the perfect addition to your garden area and it’s a really easy build from those 2X4s. It has space for everything! If you’re an avid gardener then you need a sturdy bench to work up those seeds and prepare them for planting, right? This one is really sturdy and really cheap and easy to build. Plus, it just looks really good sitting next to the house or on the deck.


Christmas decorations can be so expensive, especially when you want something as unique as these little snowmen. You can build these yourself so easily. You’ll need blocks from those 2X4s – about three blocks for each snowman – and some paint and other decorations. Just sand the blocks down and paint them white and then add scrapbooking paper with Mod Podge for the design. Then just add your faces and you’re all done.
There are lots of online sources for bun feet, but I wasn’t going to spend $30 or more when I could make my own for free. I gathered up some 3/4-in.-thick wood scraps, glued two layers together and cut out circles with a hole saw. After sanding the rough edges, I screwed each foot to a scrap of wood to hold it securely and rounded both sides with a round-over bit. A 3/4-in. round-over bit will cost you just as much as factory-made bun feet would. But spending on tools is always the right thing to do, even for a cheapskate.
This wall art is amazing and will certainly draw attention from all of your guests. It’s made from 2X4 scraps and is pretty easy to build despite how complicated it looks. The board blocks are toggled to give it dimension and overall, it’s a stunning piece of art that you are sure to love hanging. You could stain or leave the blocks plain or even paint them different colors to add even more dimension.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
I have a wine rack but it’s nowhere near as gorgeous as this one. Plus, mine doesn’t hang. This one hangs on the wall to keep it out of the way and it’s the simplest wine rack you will ever think about building. You just treat your wood however you want – stain, paint, etc. – and then drill holes, strategically placed of course, to hold your wine bottles. This is perfect if you need a wine rack but don’t really have room for something big and bulky.
It is one of the easiest woodwork projects we are going to discuss today. Although it looks very easy to make, I still could not find any good tutorial on the internet that explains how to build this one. So I am here sharing an article link that gets the closest. The article explains how to make different kinds of DIY candle holders and what items you may need for the project.

If you’re looking for a way to instantly change how your bathroom looks, this DIY open shelf vanity that you may from 2X4s is a great start. I love the open shelf look for so many reasons. Those large baskets will perfectly hold your makeup and other toiletries and the shelves are great for keeping extra towels and other necessities right there at your fingertips. It’s also the perfect vanity if you like those bowl type sinks. Plus, this is an easy build – you can have it completed in just a few hours.
Until the craziness of the holidays is over, and I have more time to spend in the shop I’ll have to post a project from a couple months ago. Based on shanty2chic plans and assembled pretty quickly with my kregjig . . . #woodworking #wood #woodworker #diy #shanty2chic #kregjig #desk #bedroom #school #maker #makersgonnamake #makersofinstagram #furniture #furniturebuilder
If you have ever wanted to build your own furniture or home decor, I have a wonderful treat for you. I’ve found 50 home decor and furniture ideas that you can make from 2X4s. The wonderful thing about this project list is you don’t have to have a lot of woodworking experience or expensive supplies to create beautiful pieces for your home. 2X4s are really cheap. In fact, they’re among the cheapest pieces of lumber that you can find. Head off to Lowe’s or your favorite home improvement store and you’ll find that these boards are only about $3 for an eight foot board. You can make so many wonderful things with those inexpensive boards, and I’m going to show you how.
After building a beautiful residence, the very first desire is to put furniture inside of it so that we can operate well its different living sections and portions according to consent! Buying furniture has always been expensive and now we can shake hands with the amazing DIY projects to get incredibly cost-efficient deals of your favorite and daily usable furniture!
If you have ever wanted to build your own furniture or home decor, I have a wonderful treat for you. I’ve found 50 home decor and furniture ideas that you can make from 2X4s. The wonderful thing about this project list is you don’t have to have a lot of woodworking experience or expensive supplies to create beautiful pieces for your home. 2X4s are really cheap. In fact, they’re among the cheapest pieces of lumber that you can find. Head off to Lowe’s or your favorite home improvement store and you’ll find that these boards are only about $3 for an eight foot board. You can make so many wonderful things with those inexpensive boards, and I’m going to show you how.
Did you know that you can build your own kitchen island for around $30? This wooden island made from 2X4s is not only beautiful, it’s also functional and so much cheaper than anything you can buy in a store. I love the rustic look of this, especially with the wood on white but you can do it in any color or design that you want. The point is, it’s really cheap and it’s the perfect island for any kitchen.

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×