Did you know that you can build your own kitchen island for around $30? This wooden island made from 2X4s is not only beautiful, it’s also functional and so much cheaper than anything you can buy in a store. I love the rustic look of this, especially with the wood on white but you can do it in any color or design that you want. The point is, it’s really cheap and it’s the perfect island for any kitchen.


Assemble the extension frames using nails or screws and a little glue. Note that one side of the frame (G) is 1/4 in. narrower than the other (H). That creates a recess for the 1/4-in. plywood back (S). Next, skin the cabinet sides with 1/4-in. plywood (Photo 1). After spreading glue, I tacked the plywood in place with a couple of brad nails and then weighted it down with paint cans. Also glue the fillers (E) into the recesses at the top and bottom of the cabinets. Fillers give you a solid core to drive screws through when you screw the cabinets to the base and top—without them, screws might pop right through the flimsy 1/2-in. particleboard of the cabinets.
If you have a few 2X4s on hand, you can build so many wonderful things. Even if you don’t have any, they’re so cheap that you can justify driving to your local hardware store to pick up a few. I’ve even got a great workbench in here that you can make from those 2X4s to help you with your other woodworking projects. Some of these can also be made from reclaimed wood. I love reclaimed wood projects. Instead of throwing out those boards when you’re redoing cabinets or other renovations, you can turn them into new and exciting pieces for your home! If you’re into reclaimed wood projects, you should also check out these 40 eco-friendly reclaimed wood projects for the home.
With technology changing so fast, it didn’t seem smart to sink a lot of money into a TV stand. But inexpensive stands didn’t have the features I wanted: enclosed storage and lots of shelves for electronic components. This stand gives me those things, plus it’s rock solid. Some inexpensive stands are rated to support 75 lbs. or less. This thing would hold a V-8 engine block. It’s sized for a 42-in. TV, but you could easily make it bigger by spacing the cabinets farther apart or choosing wider cabinets. It’s taller than most stands, which may be good or bad, depending on your situation.
It is one of the easiest woodwork projects we are going to discuss today. Although it looks very easy to make, I still could not find any good tutorial on the internet that explains how to build this one. So I am here sharing an article link that gets the closest. The article explains how to make different kinds of DIY candle holders and what items you may need for the project.
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.
Add some beauty and charm to your dining room table and use up those scrap 2X4 pieces at the same time. This centerpiece is so easy to make and it is absolutely gorgeous when it’s finished. It’s just a little box that you build from your scrap 2X4 pieces. Once you stain it, and maybe distress it a bit, and add your vases, it transforms into a beautiful centerpiece that has a really nice rustic look to it.
A small oak table is a very useful wooden item for every household. You can yourself make a nice, strong and beautiful oak table suitable for any purpose. See the image below. As you can see, it is a small, yet good enough table to be used as a coffee table, lamp stand, breakfast table, etc. You can also find many other design variants on the internet. Choose the one you want for yourself and start making it now.
Now you’re ready to glue and nail on the legs and rails (Photo 2). Glue front leg parts (L, M and N) together, then add them to the cabinet. The top rail (T) is too thin to nail to the face frame, so just nail it to the center stile (S) and clamp it in place until the glue sets. Then remove the doors, finish-sand the whole chest and add the top, which is just two layers of plywood edge-banded and glued together (Photo 3).

Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.


If you’ve ever dreamed of having a farmhouse style bedroom, this 2X4 nightstand is a must. It’s such an easy little stand to build and it really does give off that great rustic country vibe. You only need three 2X4s to make it, too – and at less than $10 each, that’s way less than you would pay for a designer farmhouse nightstand. You can afford to put one on each side of the bed!

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
If you want something really unique from those 2X4s, build these hexagon wall planters. You cut strips of the 2X4 (you only need a couple of feet for each planter) and then assemble them to hold a mason jar. Inside the mason jar, you can put all sorts of fresh flowers or plants. These are so creative and will look beautiful hanging inside your home. 
×