In just a few minutes, you can turn those 2X4s into beautifully rustic picture frames. These little frames are perfect for holding your most precious images and they are all so very easy to make. You can use those scrap pieces of board from other projects and create a frame that is perfect for gift giving. Make them as simple or as fancy as you like.
First, screw the face frames of the two cabinets together. Drill pilot holes and drive screws through the lower face frame into the upper. Then lay them on one side and hold a straightedge across the fronts of the face frames to be sure they form a straight, flat surface. I had to slip a strip of cardboard between the two cabinet boxes to get the face frames aligned.

A recess cut with a 1/2-in. cove bit lets you open doors with your fingertips. No hardware needed. Sometimes—like with this TV stand—that’s a sleek design choice. And sometimes, it’s a big money saver: I recently cut finger pulls in a whole set of laundry room doors and drawers. Compared with the cost of knobs (even inexpensive ones), that saved almost $100.

Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
A recess cut with a 1/2-in. cove bit lets you open doors with your fingertips. No hardware needed. Sometimes—like with this TV stand—that’s a sleek design choice. And sometimes, it’s a big money saver: I recently cut finger pulls in a whole set of laundry room doors and drawers. Compared with the cost of knobs (even inexpensive ones), that saved almost $100.
If you’ve ever dreamed of having a farmhouse style bedroom, this 2X4 nightstand is a must. It’s such an easy little stand to build and it really does give off that great rustic country vibe. You only need three 2X4s to make it, too – and at less than $10 each, that’s way less than you would pay for a designer farmhouse nightstand. You can afford to put one on each side of the bed!
You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set. Also, I couldn’t find a good tutorial that illustrates the process of building a wooden boat-shaped swing set. Most Probably, I will write one when I build mine.But if you really want this swing set like right now, I would suggest you hire a good woodworker, who can build something similar. Or just search the internet and maybe you get lucky enough to find a tutorial for this. Good luck either way.
Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.

These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
As you can see in the image, this shelf goes on both sides of the corner wall. It looks beautiful and can be used to organize books, trophies, pictures frames and many other things. The strength and design of the shelf depends on how properly you build it. First time workers definitely need some guidance to help them with the process. Therefore, I am including this basic video that I found on YouTube that demonstrates the process of making corner wall wooden shelves.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
This bench can be made from reclaimed wood that you’ve had left over from other projects. It’s a really simple bench to build and is perfect for the mudroom. If you don’t have a mudroom or room near the backdoor to put it, place it on the porch. It’s the perfect place it sit and take off muddy shoes and you can store baskets underneath for holding shoes or scarves and mittens when it’s cold outside.
ClickBank is the retailer of products on this site. CLICKBANK® is a registered trademark of Click Sales, Inc., a Delaware corporation located at 917 S. Lusk Street, Suite 200, Boise Idaho, 83706, USA and used by permission. ClickBank's role as retailer does not constitute an endorsement, approval or review of these products or any claim, statement or opinion used in promotion of these products.

A small oak table is a very useful wooden item for every household. You can yourself make a nice, strong and beautiful oak table suitable for any purpose. See the image below. As you can see, it is a small, yet good enough table to be used as a coffee table, lamp stand, breakfast table, etc. You can also find many other design variants on the internet. Choose the one you want for yourself and start making it now.


I love anything that has that great farmhouse style and this mirror is certainly no exception. It’s made from 2X4s and it’s pretty easy to build. You’ll need a mirror for the base of course and then a few 2X4s to build around the mirror. A dark stain would look beautiful but you can do whatever color or shade you need to match your décor. This would be perfect for a bathroom or you could even hang it in the mudroom and put hooks on the bottom for jackets.
A recess cut with a 1/2-in. cove bit lets you open doors with your fingertips. No hardware needed. Sometimes—like with this TV stand—that’s a sleek design choice. And sometimes, it’s a big money saver: I recently cut finger pulls in a whole set of laundry room doors and drawers. Compared with the cost of knobs (even inexpensive ones), that saved almost $100.
The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.

This is another example of small woodwork projects that require good time and woodworking skills. This item is built using multiple wooden parts. Each part is shaped in a specific design and then all parts are attached together to make the final TV set. I have never tried building this one, mostly because I don’t own an iPhone, but also because making this item is not an easy task. By the way, it works fine with all kinds of phones.

Another awesome thing about this coffee table is that it is also has a storage unit. So you can store drinks, and other stuff in the half barrel of your table and then close or open it whenever you need. Pete has also constructed a video for this tutorial for which you can find the link below. It illustrates the same process in a video guide that shows you the exact process to be followed while building this whiskey barrel coffee table.


Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
×