These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
You can buy one of these rustic crates for use in any number of DIY projects. They run around $10 or so each. Or, you can make one yourself from your 2X4s and they will cost you about $3 each. You’ll need some serious power tools for this one to cut the boards down to size and to round them off. Once you’re finished, you can use your wooden crate to create so many wonderful things!
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

Before fall comes around, you just have to make this great pumpkin décor from those leftover 2X4 scraps. These look like decorations that you can get at Hobby Lobby and other similar stores, which typically run around $50 for the set. You can make them yourself for under $5 if you have the boards on hand. Just paint them orange and add your decorations. This is such a simple project and it gives you such lovely décor for fall.


What is the one thing every woodworker needs? Yes, a workbench. Now that you have or at least I am assuming you have worked on so many woodworking projects, you are close to becoming a professional woodworker. You now probably owe yourself a nice woodworking bench. You should also know that a true woodworker never buys his bench from the market, but always builds one himself. But before you start this project, you should know what a workbench is.
With technology changing so fast, it didn’t seem smart to sink a lot of money into a TV stand. But inexpensive stands didn’t have the features I wanted: enclosed storage and lots of shelves for electronic components. This stand gives me those things, plus it’s rock solid. Some inexpensive stands are rated to support 75 lbs. or less. This thing would hold a V-8 engine block. It’s sized for a 42-in. TV, but you could easily make it bigger by spacing the cabinets farther apart or choosing wider cabinets. It’s taller than most stands, which may be good or bad, depending on your situation.

This potting bench is the perfect addition to your garden area and it’s a really easy build from those 2X4s. It has space for everything! If you’re an avid gardener then you need a sturdy bench to work up those seeds and prepare them for planting, right? This one is really sturdy and really cheap and easy to build. Plus, it just looks really good sitting next to the house or on the deck.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.


Now you’re ready to glue and nail on the legs and rails (Photo 2). Glue front leg parts (L, M and N) together, then add them to the cabinet. The top rail (T) is too thin to nail to the face frame, so just nail it to the center stile (S) and clamp it in place until the glue sets. Then remove the doors, finish-sand the whole chest and add the top, which is just two layers of plywood edge-banded and glued together (Photo 3).
The shelf in the first picture is made of red oak plywood. You can choose the wood type, color and design as you like for your project. In case if you need more help understanding this project, you can refer the source link below. It discusses various items used, steps and tips and personal experience of the author who personally built a Zigzag shelf.
This potting bench is the perfect addition to your garden area and it’s a really easy build from those 2X4s. It has space for everything! If you’re an avid gardener then you need a sturdy bench to work up those seeds and prepare them for planting, right? This one is really sturdy and really cheap and easy to build. Plus, it just looks really good sitting next to the house or on the deck.

If you don’t have a porch swing, you are seriously missing out on some great relaxation. The problem with porch swings is that they can be really expensive. I’ve seen just basic swings sell for around $200. The better way is to make your own and this 2X4 porch swing is amazingly simple to build. You’ll just need a few 2X4s and some chains to hang it when you’re finished. Stain it, paint it white, or leave it plain. It looks just like those more expensive swings from home improvement stores but costs about ten times less.


Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Take those old 2X4s and put them to great use building this easy DIY bike rack. If you have kids, and those kids have bikes, you know how those bikes can be left out or topple over, getting in the way of everything. You can build this great basic bike rack in the garage, on the porch, or wherever you normally store your bikes. It keeps everyone’s bike separate and keeps them from falling over when they’re not in use. Plus, it’s a really easy build.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!

First, screw the face frames of the two cabinets together. Drill pilot holes and drive screws through the lower face frame into the upper. Then lay them on one side and hold a straightedge across the fronts of the face frames to be sure they form a straight, flat surface. I had to slip a strip of cardboard between the two cabinet boxes to get the face frames aligned.


Turning an old door into a photo frame is another easy woodwork project. All you need is an old door and some woodworking tools and items. I am here sharing the link to the source tutorial that explains the step by step procedure for building a picture frame from an old wooden door. This tutorial was originally written by Tracy Snyder at athomewithsweett.blogspot.com who also tells you what items you may need and where to find them. If you haven’t already got an old door, you can purchase one from websites like Craigslist.
If you tend to love woodworking projects, this workbench is certainly something that you should build. You can get all of the supplies you need to make it for around $20, which is much cheaper than buying an already made workbench. It’s cheap and nothing that you would expect to see in a high end workshop, but it’s also sturdy and definitely gets the job done.
×