After building a beautiful residence, the very first desire is to put furniture inside of it so that we can operate well its different living sections and portions according to consent! Buying furniture has always been expensive and now we can shake hands with the amazing DIY projects to get incredibly cost-efficient deals of your favorite and daily usable furniture!
This great pencil holder is perfect for your workbench. If you don’t have a workshop and just need something for the craft table or desk, you can totally cut this one down to size. This is the simplest pencil holder ever. You just measure out your 2X4, drill holes and then you’re all done. You could easily make shorter versions of this and paint or stain them to use on your desk.
If you have ever wanted to build your own furniture or home decor, I have a wonderful treat for you. I’ve found 50 home decor and furniture ideas that you can make from 2X4s. The wonderful thing about this project list is you don’t have to have a lot of woodworking experience or expensive supplies to create beautiful pieces for your home. 2X4s are really cheap. In fact, they’re among the cheapest pieces of lumber that you can find. Head off to Lowe’s or your favorite home improvement store and you’ll find that these boards are only about $3 for an eight foot board. You can make so many wonderful things with those inexpensive boards, and I’m going to show you how.
Imagine having your friends and family over to play this life size Jenga game! This is probably the most fun project on this list and it really does look simple to make. Jenga after all, is merely a game of wooden boards that you strategically place and replace until someone wins, right? You can do that with your 2X4s and really cause some excitement at your next gathering. This is a great idea for those summer evenings when you want something fun and exciting to do in the backyard.
I love this lantern. It’s made from 2X4s and has such a wonderful rustic look to it. You piece it together with blocks from your 2X4s and it holds candles. It’s perfect for sitting on the porch any time of the year and you can really dress it up for the holiday season. It resembles those old rustic metal lanterns and you can easily make it from leftover blocks of 2X4 – you know, those pieces you have on hand after you’ve done other 2X4 projects.
If you don’t have a porch swing, you are seriously missing out on some great relaxation. The problem with porch swings is that they can be really expensive. I’ve seen just basic swings sell for around $200. The better way is to make your own and this 2X4 porch swing is amazingly simple to build. You’ll just need a few 2X4s and some chains to hang it when you’re finished. Stain it, paint it white, or leave it plain. It looks just like those more expensive swings from home improvement stores but costs about ten times less.
This is probably one the easiest woodworking projects you will find here. Although easy, a doormat is an equally important and useful item for households. As you can see in the image below, you will only need some 2X2 wooden boards and rope to build a simple doormat. This doormat is mostly useful for outdoor and porch. It will easily remove all the mud from your shoes with just one wipe. It is also very easy to clean and looks fabulous even if it is dirty.
You only need a couple of 2X4s to build this beautiful farmhouse style entry table. You could also use this as a console – however you use it, you’re going to love the farmhouse quality. It’s such a simple rustic design and you can build the entire table, even if you don’t have any other materials, for $20 or less. Imagine having this amazing table for less than $20!
In just a few minutes, you can turn those 2X4s into beautifully rustic picture frames. These little frames are perfect for holding your most precious images and they are all so very easy to make. You can use those scrap pieces of board from other projects and create a frame that is perfect for gift giving. Make them as simple or as fancy as you like.

There are lots of online sources for bun feet, but I wasn’t going to spend $30 or more when I could make my own for free. I gathered up some 3/4-in.-thick wood scraps, glued two layers together and cut out circles with a hole saw. After sanding the rough edges, I screwed each foot to a scrap of wood to hold it securely and rounded both sides with a round-over bit. A 3/4-in. round-over bit will cost you just as much as factory-made bun feet would. But spending on tools is always the right thing to do, even for a cheapskate.
This outdoor couch will take a few 2X4s – about 11 of them to be exact but at less than $10 each for the boards, it will still cost you less than anything you can get at a patio or furniture store. And, it’s a really sturdy couch. The best part? You can completely build this couch in less than four hours. Once you’ve finished, just add those homemade couch cushions and you’re all set to relax in the backyard.

If you’ve ever dreamed of having a farmhouse style bedroom, this 2X4 nightstand is a must. It’s such an easy little stand to build and it really does give off that great rustic country vibe. You only need three 2X4s to make it, too – and at less than $10 each, that’s way less than you would pay for a designer farmhouse nightstand. You can afford to put one on each side of the bed!
If you don’t have a porch swing, you are seriously missing out on some great relaxation. The problem with porch swings is that they can be really expensive. I’ve seen just basic swings sell for around $200. The better way is to make your own and this 2X4 porch swing is amazingly simple to build. You’ll just need a few 2X4s and some chains to hang it when you’re finished. Stain it, paint it white, or leave it plain. It looks just like those more expensive swings from home improvement stores but costs about ten times less.

With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set. Also, I couldn’t find a good tutorial that illustrates the process of building a wooden boat-shaped swing set. Most Probably, I will write one when I build mine.But if you really want this swing set like right now, I would suggest you hire a good woodworker, who can build something similar. Or just search the internet and maybe you get lucky enough to find a tutorial for this. Good luck either way.

Put those 2X4s to great use by building this amazing farmhouse styled X console. If you need a console table, this is a great one to build. It’s pretty easy and you get that wonderful rustic country look. You can use reclaimed wood to give it a more distressed look or build it from new boards and just distress it yourself – or paint it white, whatever you want to match your existing decor.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
×