This is not exactly a tutorial, but a guide to some really cool woodworking projects. Although we are not teaching you to make anything, we are always here to help. Feel free to ask your queries in the comments in case if you face any issue while working on any of these projects. Also, tell us how much you liked this article. Did you enjoy reading it? Did you work on any of these projects, and if yes, how was your experience? You are also welcome to share any images of your completed woodwork projects.
There are lots of online sources for bun feet, but I wasn’t going to spend $30 or more when I could make my own for free. I gathered up some 3/4-in.-thick wood scraps, glued two layers together and cut out circles with a hole saw. After sanding the rough edges, I screwed each foot to a scrap of wood to hold it securely and rounded both sides with a round-over bit. A 3/4-in. round-over bit will cost you just as much as factory-made bun feet would. But spending on tools is always the right thing to do, even for a cheapskate.
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
This wall art is amazing and will certainly draw attention from all of your guests. It’s made from 2X4 scraps and is pretty easy to build despite how complicated it looks. The board blocks are toggled to give it dimension and overall, it’s a stunning piece of art that you are sure to love hanging. You could stain or leave the blocks plain or even paint them different colors to add even more dimension.

With technology changing so fast, it didn’t seem smart to sink a lot of money into a TV stand. But inexpensive stands didn’t have the features I wanted: enclosed storage and lots of shelves for electronic components. This stand gives me those things, plus it’s rock solid. Some inexpensive stands are rated to support 75 lbs. or less. This thing would hold a V-8 engine block. It’s sized for a 42-in. TV, but you could easily make it bigger by spacing the cabinets farther apart or choosing wider cabinets. It’s taller than most stands, which may be good or bad, depending on your situation.

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Building a Wooden Office Desk Organizer is an easy task for a professional woodworker, but not so much for normal people like you and me. But that doesn’t mean you cannot do this. Two years ago, I had almost no woodworking experience, but now I make most of my household and office wooden items by myself. This saves me a lot of money. And believe me when I say this; you can also manage to make wonderful wood items with a little practice and some woodworking experience.
I used a 1/2-in.-radius cove bit and cut to a depth of 1/2 in. That’s too deep for a single router pass, so I made three passes, removing and replacing the breakout block after each pass. To make the base top, use the same wrap-and-rout procedure. Round the top and bottom of the banding (see Figure A) with a 3/8-in. round-over bit. Again, use a breakout block to prevent splintering. Repeat this entire process to build the top of the stand, which is simply a larger version of the base top. To complete the top, add scraps of plywood and cove molding on the underside (Photo 3).

From the image above it seems that you do not require a big tutorial to help you to build this candle holder. All you need is a wood panel, a hook and some nails/screws and do exactly what you see in the picture. Attach the hook to the wood panel using two screws and then, attach the panel to the wall using more nails or screws. That’s it. I hope this gets the job done.
Here’s another great way to add some whimsical décor to your home and use up those 2X4 blocks at the same time. You can make them into penguins! These little guys are perfect for dressing up your home for the holidays and you can leave them out all winter long. You’ll need blocks of wood and then black and white paint to make the penguin design. This is a great project for the kids to help with – they’ll have a blast creating their own little unique penguin.
If you bought this superb polished table in a store, it would cost you a fortune, but our detailed instructions will help you make one for less than $100. And it looks like highly polished stone, but no-one would know it’s actually made from concrete with a wooden base. Also, you can embellish the top with leaf prints, like the table shown here, or personalize it with glass or mosaic tiles or imprints of seashells.
This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
×