In just a few minutes, you can turn those 2X4s into beautifully rustic picture frames. These little frames are perfect for holding your most precious images and they are all so very easy to make. You can use those scrap pieces of board from other projects and create a frame that is perfect for gift giving. Make them as simple or as fancy as you like.
Until the craziness of the holidays is over, and I have more time to spend in the shop I’ll have to post a project from a couple months ago. Based on shanty2chic plans and assembled pretty quickly with my kregjig . . . #woodworking #wood #woodworker #diy #shanty2chic #kregjig #desk #bedroom #school #maker #makersgonnamake #makersofinstagram #furniture #furniturebuilder
Put those 2X4s to great use by building this amazing farmhouse styled X console. If you need a console table, this is a great one to build. It’s pretty easy and you get that wonderful rustic country look. You can use reclaimed wood to give it a more distressed look or build it from new boards and just distress it yourself – or paint it white, whatever you want to match your existing decor.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
The base starts with a plywood frame constructed much like the extension frames: nails or screws, plus glue. Top off the frame by gluing on 1/4-in. plywood (L). Now you’re ready to wrap the frame with solid wood facing using one of my favorite woodworking shortcuts: Instead of routing the facing, then fussing with mitered corners, glue on the facing before you rout and just form simple 90-degree butt joints at corners. Sand the corners flush and then rout the facing (Photo 2). You’ll get tight, perfect corners—fast.
The procedure is very easy to understand and follow for anyone with a little woodworking knowledge. Make sure to collect all the items you need before you start with the project. You may even ask Tracy your queries directly in the comment section of the tutorial post. Or you can ask them here. Either way, I hope that you manage to build this one nicely.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
Put those 2X4s to great use by building this amazing farmhouse styled X console. If you need a console table, this is a great one to build. It’s pretty easy and you get that wonderful rustic country look. You can use reclaimed wood to give it a more distressed look or build it from new boards and just distress it yourself – or paint it white, whatever you want to match your existing decor.
You only need a couple of 2X4s to build this beautiful farmhouse style entry table. You could also use this as a console – however you use it, you’re going to love the farmhouse quality. It’s such a simple rustic design and you can build the entire table, even if you don’t have any other materials, for $20 or less. Imagine having this amazing table for less than $20!
Now you’re ready to glue and nail on the legs and rails (Photo 2). Glue front leg parts (L, M and N) together, then add them to the cabinet. The top rail (T) is too thin to nail to the face frame, so just nail it to the center stile (S) and clamp it in place until the glue sets. Then remove the doors, finish-sand the whole chest and add the top, which is just two layers of plywood edge-banded and glued together (Photo 3).
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.
You only need a couple of 2X4s to build this beautiful farmhouse style entry table. You could also use this as a console – however you use it, you’re going to love the farmhouse quality. It’s such a simple rustic design and you can build the entire table, even if you don’t have any other materials, for $20 or less. Imagine having this amazing table for less than $20!
Used cabinets from remodeling jobs are my first choice for furniture projects (they’re free!). I also like damaged cabinets from the local salvage store (cheap!). The trouble with these tightwad options is that the cabinets are already finished, and finishing raw wood to match the factory finish is tough. To get around this, I’ve painted the furniture or stained the new wood surrounding the cabinets a contrasting color for a two-tone look.
Take those old 2X4s and put them to great use building this easy DIY bike rack. If you have kids, and those kids have bikes, you know how those bikes can be left out or topple over, getting in the way of everything. You can build this great basic bike rack in the garage, on the porch, or wherever you normally store your bikes. It keeps everyone’s bike separate and keeps them from falling over when they’re not in use. Plus, it’s a really easy build.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
×