Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Here’s another wonderful DIY centerpiece idea that you can create with those leftover 2X4 pieces. This one has small holes all around the base that you can put bud vases in. Just fill those little vases with whatever flowers you want to display. You just put all the pieces together, drill the holes and then stain or paint. You can use test tubes for your vases and then just add your favorite blooms.

I used a 1/2-in.-radius cove bit and cut to a depth of 1/2 in. That’s too deep for a single router pass, so I made three passes, removing and replacing the breakout block after each pass. To make the base top, use the same wrap-and-rout procedure. Round the top and bottom of the banding (see Figure A) with a 3/8-in. round-over bit. Again, use a breakout block to prevent splintering. Repeat this entire process to build the top of the stand, which is simply a larger version of the base top. To complete the top, add scraps of plywood and cove molding on the underside (Photo 3).
If you want something really unique from those 2X4s, build these hexagon wall planters. You cut strips of the 2X4 (you only need a couple of feet for each planter) and then assemble them to hold a mason jar. Inside the mason jar, you can put all sorts of fresh flowers or plants. These are so creative and will look beautiful hanging inside your home.
These block bunnies that you build from 2X4s are perfect for Easter. They’re easy to make and such a whimsical way to dress up your spring décor. Just cut blocks from those 2X4s of different sizes, you can make an entire family of bunnies, and then paint them white with a little distressing and add your bunny ears and faces. They’re so easy to make and add such wonderful whimsy to your home.
A recess cut with a 1/2-in. cove bit lets you open doors with your fingertips. No hardware needed. Sometimes—like with this TV stand—that’s a sleek design choice. And sometimes, it’s a big money saver: I recently cut finger pulls in a whole set of laundry room doors and drawers. Compared with the cost of knobs (even inexpensive ones), that saved almost $100.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.

The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.


Here’s a great project for using up those 2X4s – build yourself a farmhouse kitchen table! I love this entire project. It’s a relatively easy build and I just adore the thought of a huge kitchen table where family and friends can gather. If you’ve ever wanted to bring some serious farmhouse style into your home décor, this is your chance. And, you’ll save hundreds by building it yourself instead of buying it.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.
[…] Easy woodworking projects diy ready. Want to try your skills in some easy woodworking projects? Whether you’re a beginner or an expert, you’ll find something to work on these wood craft ideas. Diy numbered wood slice coasters {easy sharpie. Create rusticchic numbered wood slice coasters with a simple stencilandsharpie method for decor and. 15 diy wood burning projects wood burning art. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy. Project gallery diy/crafts the happier. I love all these ideas but don’t have time to print them all. Do you by chance have a book of your crafts. Easy diy and crafts all about diy and crafts. The summer is already here, so where would you rather spend the rest of your hard day at work than at. 31 insanely easy and clever diy projects. Diy 31 insanely easy and clever diy projects. These are the kind of simple projects for the laziest and. 15 diy wood burning projects wood burning art diy ready. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy wood burning projects. Get into wood burning art. 15 creatively genius diy wood walls diy & crafts. These 15 themed wood walls are not only easy to diy, they’re relatively cheap. In fact, some of them may not cost you anything at all. How’s that for frugal? […]
Imagine having your friends and family over to play this life size Jenga game! This is probably the most fun project on this list and it really does look simple to make. Jenga after all, is merely a game of wooden boards that you strategically place and replace until someone wins, right? You can do that with your 2X4s and really cause some excitement at your next gathering. This is a great idea for those summer evenings when you want something fun and exciting to do in the backyard.

The base starts with a plywood frame constructed much like the extension frames: nails or screws, plus glue. Top off the frame by gluing on 1/4-in. plywood (L). Now you’re ready to wrap the frame with solid wood facing using one of my favorite woodworking shortcuts: Instead of routing the facing, then fussing with mitered corners, glue on the facing before you rout and just form simple 90-degree butt joints at corners. Sand the corners flush and then rout the facing (Photo 2). You’ll get tight, perfect corners—fast.


First, screw the face frames of the two cabinets together. Drill pilot holes and drive screws through the lower face frame into the upper. Then lay them on one side and hold a straightedge across the fronts of the face frames to be sure they form a straight, flat surface. I had to slip a strip of cardboard between the two cabinet boxes to get the face frames aligned.
MATERIAL CONNECTION DISCLOSURE: You should assume that this website has an affiliate relationship and/or another material connection to the persons or businesses mentioned in or linked to from this page and may receive commissions from purchases you make on subsequent web sites. You should not rely solely on information contained in this email to evaluate the product or service being endorsed. Always exercise due diligence before purchasing any product or service. This website contains advertisements.
I recently came across this beautiful wooden swing set, which was made in the shape of a boat. Cool, isn’t it? The very first look was enough for me to start loving it. Although I haven’t yet tried building one myself, I am definitely going to. Later I realized that you can also build a baby cradle with the same idea. After all, what can be more calming than the tender rocking of a boat? This swing set will surely help your child get more gentle sleep.
Here’s another great way to add some whimsical décor to your home and use up those 2X4 blocks at the same time. You can make them into penguins! These little guys are perfect for dressing up your home for the holidays and you can leave them out all winter long. You’ll need blocks of wood and then black and white paint to make the penguin design. This is a great project for the kids to help with – they’ll have a blast creating their own little unique penguin.

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
You only need a couple of 2X4s to build this beautiful farmhouse style entry table. You could also use this as a console – however you use it, you’re going to love the farmhouse quality. It’s such a simple rustic design and you can build the entire table, even if you don’t have any other materials, for $20 or less. Imagine having this amazing table for less than $20!
These block bunnies that you build from 2X4s are perfect for Easter. They’re easy to make and such a whimsical way to dress up your spring décor. Just cut blocks from those 2X4s of different sizes, you can make an entire family of bunnies, and then paint them white with a little distressing and add your bunny ears and faces. They’re so easy to make and add such wonderful whimsy to your home.
The source above is not exactly a tutorial, but it gives you a basic idea of how the author built a Quirky Pallet Art to enhance the look of their old house. You can also find another tutorial at the link below. It shares a step by step procedure for making a wooden pallet sign. The final product is not exactly the same as the one above, but the basic idea is the same.
If you tend to love woodworking projects, this workbench is certainly something that you should build. You can get all of the supplies you need to make it for around $20, which is much cheaper than buying an already made workbench. It’s cheap and nothing that you would expect to see in a high end workshop, but it’s also sturdy and definitely gets the job done.
×