Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
Here’s another wonderful DIY centerpiece idea that you can create with those leftover 2X4 pieces. This one has small holes all around the base that you can put bud vases in. Just fill those little vases with whatever flowers you want to display. You just put all the pieces together, drill the holes and then stain or paint. You can use test tubes for your vases and then just add your favorite blooms.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
When neither paint nor a two-tone look is suitable, I buy unfinished stock cabinets like the ones shown in this article. Home centers usually carry one style only and one wood species only (typically oak). For the projects shown here, I used 12-in.-deep “upper” cabinets. The cabinets you find may not be exactly like mine, so you may have to alter the measurements given in my plans.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

As a world-class penny pincher, I’ve found that stock cabinets are the key to low-cost, good-quality DIY furniture. I get handsome, sturdy, real-wood furniture for the cost of assemble-it-yourself pieces sold at discount stores. And the advantages go way beyond saving money. Cabinets make furniture building incredibly quick and easy by eliminating the difficult, fussy process of building and hanging doors.
How great is this little Jeep? Whether you use this as a handmade toy or you want to display it, it’s a beautiful project and one that you can DIY! This one will take you a bit of time, but imagine how it will look displayed in your home. You can leave it plain for a rustic look or paint it however you want. If you’ve ever wanted to build your own Jeep – not one that you can drive obviously – this is the perfect 2X4 project.
What is the one thing every woodworker needs? Yes, a workbench. Now that you have or at least I am assuming you have worked on so many woodworking projects, you are close to becoming a professional woodworker. You now probably owe yourself a nice woodworking bench. You should also know that a true woodworker never buys his bench from the market, but always builds one himself. But before you start this project, you should know what a workbench is.
The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.
What is the one thing every woodworker needs? Yes, a workbench. Now that you have or at least I am assuming you have worked on so many woodworking projects, you are close to becoming a professional woodworker. You now probably owe yourself a nice woodworking bench. You should also know that a true woodworker never buys his bench from the market, but always builds one himself. But before you start this project, you should know what a workbench is.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc—inside the traced circle—then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
ClickBank is the retailer of products on this site. CLICKBANK® is a registered trademark of Click Sales, Inc., a Delaware corporation located at 917 S. Lusk Street, Suite 200, Boise Idaho, 83706, USA and used by permission. ClickBank's role as retailer does not constitute an endorsement, approval or review of these products or any claim, statement or opinion used in promotion of these products.
I used a 1/2-in.-radius cove bit and cut to a depth of 1/2 in. That’s too deep for a single router pass, so I made three passes, removing and replacing the breakout block after each pass. To make the base top, use the same wrap-and-rout procedure. Round the top and bottom of the banding (see Figure A) with a 3/8-in. round-over bit. Again, use a breakout block to prevent splintering. Repeat this entire process to build the top of the stand, which is simply a larger version of the base top. To complete the top, add scraps of plywood and cove molding on the underside (Photo 3).

A small oak table is a very useful wooden item for every household. You can yourself make a nice, strong and beautiful oak table suitable for any purpose. See the image below. As you can see, it is a small, yet good enough table to be used as a coffee table, lamp stand, breakfast table, etc. You can also find many other design variants on the internet. Choose the one you want for yourself and start making it now.


Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below
As soon as I came across this tutorial, I didn’t wait any longer to start building one. Some of the items you need for this project are hardwood plywood, saw, glue, nails, drilling machine, etc. The video is very easy to follow for anyone with basic woodworking knowledge and experience. The first source link also includes a step by step procedure in plain English for those, who are not comfortable enough with the video tutorial.
It may not be close to St. Patrick’s Day but that shouldn’t stop you from making this adorable little leprechaun’s hat. You can use it to decorate next year, and it’s made from leftover pieces of your 2X4. If you’re looking for a project to finish up those wood scraps, here it is. Just paint your wood pieces green and then stack them to make the hat. It’s easy and adorable!
If you need a sawhorse for all of those woodworking projects, this is an easy one to build. You just nail your 2X4s together to create it and since those boards are a bit heavy, this little sawhorse is rock solid. You won’t have to worry about your boards slipping when you have them on here for sawing. If you don’t have a sawhorse, and you don’t want to spend upwards of $50 to buy a pair, I strongly recommend this DIY project.
I love anything that has that great farmhouse style and this mirror is certainly no exception. It’s made from 2X4s and it’s pretty easy to build. You’ll need a mirror for the base of course and then a few 2X4s to build around the mirror. A dark stain would look beautiful but you can do whatever color or shade you need to match your décor. This would be perfect for a bathroom or you could even hang it in the mudroom and put hooks on the bottom for jackets.
I used a 1/2-in.-radius cove bit and cut to a depth of 1/2 in. That’s too deep for a single router pass, so I made three passes, removing and replacing the breakout block after each pass. To make the base top, use the same wrap-and-rout procedure. Round the top and bottom of the banding (see Figure A) with a 3/8-in. round-over bit. Again, use a breakout block to prevent splintering. Repeat this entire process to build the top of the stand, which is simply a larger version of the base top. To complete the top, add scraps of plywood and cove molding on the underside (Photo 3).
Why would you buy a costly platform bed from Ikea or somewhere else when you can make one yourself at home? Oh yes, you can. A bed is the most common furniture piece used in the house and probably the costliest one. Wouldn’t it be great if you could just make a bed of your own, without having to spend many bucks for buying one? So I am here sharing a great tutorial to help you to build a nice comfy platform bed that you can use anywhere in the house.

The source above is not exactly a tutorial, but it gives you a basic idea of how the author built a Quirky Pallet Art to enhance the look of their old house. You can also find another tutorial at the link below. It shares a step by step procedure for making a wooden pallet sign. The final product is not exactly the same as the one above, but the basic idea is the same.


Imagine having your friends and family over to play this life size Jenga game! This is probably the most fun project on this list and it really does look simple to make. Jenga after all, is merely a game of wooden boards that you strategically place and replace until someone wins, right? You can do that with your 2X4s and really cause some excitement at your next gathering. This is a great idea for those summer evenings when you want something fun and exciting to do in the backyard.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
×