Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
This great floating shelf has a nice rustic quality to it. This little shelf is really easy to build and will only take you a couple of hours at the most. You can use it for a mantel if you don’t have one – imagine hanging your stockings from it! Once it’s finished, just stain however you want and maybe sand it down a bit to give it a great worn look.
[…] Easy woodworking projects diy ready. Easy woodworking projects woodworking projects. It’s always such an accomplishment when you’ve finished a diy project you spent time and effort on. Diy carpentry & woodworking crown molding,. Understand the basics of carpentry and woodworking with tips on installing crown molding, beadboard, & Diy definition of diy by the free dictionary. More than half of diy activity is now inspired by tv shows,but two thirds of families in north wales. Free diy plans how to read woodworking plans. Looking for free woodworking plans? More than 1850 free woodworking plans and projects in over 200. Kreg® diy project kit rockler woodworking & hardware. A major challenge facing beginning doityourselfers and woodworkers is a lack of accurate jigs to guarantee precise results. The kreg diy project kit overcomes this. Woodworking, diy curved beams? Learn how youtube. Mar 01, 2015 have you ever wanted to build a beautiful arched bridge over a pond or creek? Here you will learn how to. […]
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
I used a 1/2-in.-radius cove bit and cut to a depth of 1/2 in. That’s too deep for a single router pass, so I made three passes, removing and replacing the breakout block after each pass. To make the base top, use the same wrap-and-rout procedure. Round the top and bottom of the banding (see Figure A) with a 3/8-in. round-over bit. Again, use a breakout block to prevent splintering. Repeat this entire process to build the top of the stand, which is simply a larger version of the base top. To complete the top, add scraps of plywood and cove molding on the underside (Photo 3).
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
This great floating shelf has a nice rustic quality to it. This little shelf is really easy to build and will only take you a couple of hours at the most. You can use it for a mantel if you don’t have one – imagine hanging your stockings from it! Once it’s finished, just stain however you want and maybe sand it down a bit to give it a great worn look.
If you tend to love woodworking projects, this workbench is certainly something that you should build. You can get all of the supplies you need to make it for around $20, which is much cheaper than buying an already made workbench. It’s cheap and nothing that you would expect to see in a high end workshop, but it’s also sturdy and definitely gets the job done.
Before fall comes around, you just have to make this great pumpkin décor from those leftover 2X4 scraps. These look like decorations that you can get at Hobby Lobby and other similar stores, which typically run around $50 for the set. You can make them yourself for under $5 if you have the boards on hand. Just paint them orange and add your decorations. This is such a simple project and it gives you such lovely décor for fall.
Add some beauty and charm to your dining room table and use up those scrap 2X4 pieces at the same time. This centerpiece is so easy to make and it is absolutely gorgeous when it’s finished. It’s just a little box that you build from your scrap 2X4 pieces. Once you stain it, and maybe distress it a bit, and add your vases, it transforms into a beautiful centerpiece that has a really nice rustic look to it.

These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
If you don’t have a porch swing, you are seriously missing out on some great relaxation. The problem with porch swings is that they can be really expensive. I’ve seen just basic swings sell for around $200. The better way is to make your own and this 2X4 porch swing is amazingly simple to build. You’ll just need a few 2X4s and some chains to hang it when you’re finished. Stain it, paint it white, or leave it plain. It looks just like those more expensive swings from home improvement stores but costs about ten times less.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
The tutorial that I am sharing here was written by someone who built this pallet art just to improve the value of a property they wanted to sell fast and they succeed in it. So you can imagine how wonderful this item must look like. I am assuming you do not just want to make this beautiful pallet art so that you can also sell your property easily. Well, whatever your reasons are, this beauty is able to attract anyone who visits your house.
Take those old 2X4s and put them to great use building this easy DIY bike rack. If you have kids, and those kids have bikes, you know how those bikes can be left out or topple over, getting in the way of everything. You can build this great basic bike rack in the garage, on the porch, or wherever you normally store your bikes. It keeps everyone’s bike separate and keeps them from falling over when they’re not in use. Plus, it’s a really easy build.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
×