Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
This wall art is amazing and will certainly draw attention from all of your guests. It’s made from 2X4 scraps and is pretty easy to build despite how complicated it looks. The board blocks are toggled to give it dimension and overall, it’s a stunning piece of art that you are sure to love hanging. You could stain or leave the blocks plain or even paint them different colors to add even more dimension.
Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.

This lamp has a really unique look and it’s perfect for any room in the house. You build the base, which is pretty high by the way, out of your 2X4s and then just add the lighting kit and a nice lampshade. You can make the lamp as short or as tall as you want or need, just cut those boards however long you need them before assembling it all together.
If you’ve ever done a woodworking project, you know that there are going to be scrap pieces of wood left over. You can turn those scrap 2X4 pieces into these lovely candle holders that fit a tealight candle perfectly. Just cut your candle holders all to the same size, use a drill bit to create the hole for the tealight candle and then sand and stain. Or, you can leave them plain if you prefer that great rustic look.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
You can make these adorable stocking hangers from leftover 2X4 pieces from other projects. You just have to nail the two pieces together, add a hook for hanging the stocking, and then decorate they however you want. The wood pieces are relatively heavy so they’ll keep from topping over – fill those stockings as full as you want. And, this is a much cheaper way to get great stocking holders than paying $10 each for them.
This wooden décor is gorgeous and a great way to show your love of family. You can obviously do whatever message you want on this, but I really love the Journey To Forever theme. The blocks are all made from leftover 2X4 pieces and then you just paint and add your wording. Or, you can use scrapbook paper and adhere it to your blocks with Mod Podge. What a beautiful display for the mantel or coffee table!
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
When neither paint nor a two-tone look is suitable, I buy unfinished stock cabinets like the ones shown in this article. Home centers usually carry one style only and one wood species only (typically oak). For the projects shown here, I used 12-in.-deep “upper” cabinets. The cabinets you find may not be exactly like mine, so you may have to alter the measurements given in my plans.
Put those 2X4s to great use by building this amazing farmhouse styled X console. If you need a console table, this is a great one to build. It’s pretty easy and you get that wonderful rustic country look. You can use reclaimed wood to give it a more distressed look or build it from new boards and just distress it yourself – or paint it white, whatever you want to match your existing decor.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
A small oak table is a very useful wooden item for every household. You can yourself make a nice, strong and beautiful oak table suitable for any purpose. See the image below. As you can see, it is a small, yet good enough table to be used as a coffee table, lamp stand, breakfast table, etc. You can also find many other design variants on the internet. Choose the one you want for yourself and start making it now.
Many of these DIYs are so easy that you can do them in your spare time. Have a weekend free? You can build an outdoor couch, bench, or any number of console and coffee tables to add farmhouse rustic style to your home. In less than an hour, you can make wonderful holiday décor or some beautiful gifts for teachers and friends. I’m telling you, these projects are all super easy and they’re all so very inexpensive. I love simple and cheap projects, and particularly when those projects end in rustic or farmhouse furnishings. Check out these 55 farmhouse furniture projects that you can make yourself.
Before fall comes around, you just have to make this great pumpkin décor from those leftover 2X4 scraps. These look like decorations that you can get at Hobby Lobby and other similar stores, which typically run around $50 for the set. You can make them yourself for under $5 if you have the boards on hand. Just paint them orange and add your decorations. This is such a simple project and it gives you such lovely décor for fall.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
×