This bench can be made from reclaimed wood that you’ve had left over from other projects. It’s a really simple bench to build and is perfect for the mudroom. If you don’t have a mudroom or room near the backdoor to put it, place it on the porch. It’s the perfect place it sit and take off muddy shoes and you can store baskets underneath for holding shoes or scarves and mittens when it’s cold outside.
This wall art is amazing and will certainly draw attention from all of your guests. It’s made from 2X4 scraps and is pretty easy to build despite how complicated it looks. The board blocks are toggled to give it dimension and overall, it’s a stunning piece of art that you are sure to love hanging. You could stain or leave the blocks plain or even paint them different colors to add even more dimension.
Before fall comes around, you just have to make this great pumpkin décor from those leftover 2X4 scraps. These look like decorations that you can get at Hobby Lobby and other similar stores, which typically run around $50 for the set. You can make them yourself for under $5 if you have the boards on hand. Just paint them orange and add your decorations. This is such a simple project and it gives you such lovely décor for fall.
The video explains the step by step process of making a nice wooden phone stand from scratch. My first wooden holder was not the best one, but it was good enough to motivate me to make more. I now possess 10 mobile wooden stands in different shapes and styles. And if I can make this, you too can make one yourself. Search the internet for more mobile holder ideas and start making one now.
Take those old 2X4s and put them to great use building this easy DIY bike rack. If you have kids, and those kids have bikes, you know how those bikes can be left out or topple over, getting in the way of everything. You can build this great basic bike rack in the garage, on the porch, or wherever you normally store your bikes. It keeps everyone’s bike separate and keeps them from falling over when they’re not in use. Plus, it’s a really easy build.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc—inside the traced circle—then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
If you tend to love woodworking projects, this workbench is certainly something that you should build. You can get all of the supplies you need to make it for around $20, which is much cheaper than buying an already made workbench. It’s cheap and nothing that you would expect to see in a high end workshop, but it’s also sturdy and definitely gets the job done.
Until the craziness of the holidays is over, and I have more time to spend in the shop I’ll have to post a project from a couple months ago. Based on shanty2chic plans and assembled pretty quickly with my kregjig . . . #woodworking #wood #woodworker #diy #shanty2chic #kregjig #desk #bedroom #school #maker #makersgonnamake #makersofinstagram #furniture #furniturebuilder
When neither paint nor a two-tone look is suitable, I buy unfinished stock cabinets like the ones shown in this article. Home centers usually carry one style only and one wood species only (typically oak). For the projects shown here, I used 12-in.-deep “upper” cabinets. The cabinets you find may not be exactly like mine, so you may have to alter the measurements given in my plans.
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
This wooden blanket ladder can be made for around $10 and it’s perfect for holding your smaller blankets. You could even put it in the bathroom and use it to hold extra towels. It has a wonderful farmhouse look and is so easy to build – you can have it completed in about an hour and it will only cost around $10 including the 2X4s that you need. If you have those boards on hand already, you can make this one for free.
Assemble the extension frames using nails or screws and a little glue. Note that one side of the frame (G) is 1/4 in. narrower than the other (H). That creates a recess for the 1/4-in. plywood back (S). Next, skin the cabinet sides with 1/4-in. plywood (Photo 1). After spreading glue, I tacked the plywood in place with a couple of brad nails and then weighted it down with paint cans. Also glue the fillers (E) into the recesses at the top and bottom of the cabinets. Fillers give you a solid core to drive screws through when you screw the cabinets to the base and top—without them, screws might pop right through the flimsy 1/2-in. particleboard of the cabinets.
This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.