With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Until the craziness of the holidays is over, and I have more time to spend in the shop I’ll have to post a project from a couple months ago. Based on shanty2chic plans and assembled pretty quickly with my kregjig . . . #woodworking #wood #woodworker #diy #shanty2chic #kregjig #desk #bedroom #school #maker #makersgonnamake #makersofinstagram #furniture #furniturebuilder

In just a few minutes, you can turn those 2X4s into beautifully rustic picture frames. These little frames are perfect for holding your most precious images and they are all so very easy to make. You can use those scrap pieces of board from other projects and create a frame that is perfect for gift giving. Make them as simple or as fancy as you like.
This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
Screw the cabinets first to the base, driving screws from inside the cabinet boxes (see Figure A). Then set the top in place and fasten it the same way before adding the back panel (S). Measure between the cabinets and subtract 1/8 in. to determine the width of the shelves. To make the shelves, glue banding to a long piece of plywood and rout it with a round-over bit, just as you did to make the top. Then cut the plywood into sections. The shelves rest on adjustable supports. I drilled 2-in. holes into the extension frames for cables to exit behind the stand. Those holes also provide a nook to stuff excess wires into. Next, disassemble the stand for finishing. I applied two heavy coats of Minwax Ebony stain followed by two coats of Minwax Wipe-On Poly. Later, with the stand assembled and in place, I drove a single screw through the top cleat (T) into a wall stud—insurance against tipping forward.

If you tend to love woodworking projects, this workbench is certainly something that you should build. You can get all of the supplies you need to make it for around $20, which is much cheaper than buying an already made workbench. It’s cheap and nothing that you would expect to see in a high end workshop, but it’s also sturdy and definitely gets the job done.

This lamp has a really unique look and it’s perfect for any room in the house. You build the base, which is pretty high by the way, out of your 2X4s and then just add the lighting kit and a nice lampshade. You can make the lamp as short or as tall as you want or need, just cut those boards however long you need them before assembling it all together.
From the image above it seems that you do not require a big tutorial to help you to build this candle holder. All you need is a wood panel, a hook and some nails/screws and do exactly what you see in the picture. Attach the hook to the wood panel using two screws and then, attach the panel to the wall using more nails or screws. That’s it. I hope this gets the job done.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
Did you know that you can build your own kitchen island for around $30? This wooden island made from 2X4s is not only beautiful, it’s also functional and so much cheaper than anything you can buy in a store. I love the rustic look of this, especially with the wood on white but you can do it in any color or design that you want. The point is, it’s really cheap and it’s the perfect island for any kitchen.

This coffee table is so unique and it’s really easy to build. You’ll need a few 2X4s which you basically stack, toggled to create a beautiful design, on top of a metal leg base. I love the look of this one. It combines that great rustic look with a wonderful 1960’s look that is perfect for any living room. You could use the bench style legs or wooden legs – or even build the legs yourself from the leftover pieces of your boards.
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.

These things may be tiny in size, but building one is not that easy. It takes some serious woodworking knowledge and skill to build a nice wooden mobile stand. When I first saw one online, I just couldn’t resist thinking of buying one. But when I saw the price, I was forced to rethink. Also, a woodwork lover like me cannot be contained with just one piece and I was not willing to spend on more than one. So instead I decided to build myself one. Yes, it took some doing but the final result was satisfying. Luckily, I found this awesome tutorial online that helped me build my first ever wooden phone holder.
This plant stand is a really easy build and it looks so professionally done when it’s finished. You can use this to display your favorite plants and keep them close to the window for the sunlight that they need. You need about four 2X4s and some other supplies to build it. It’s a pretty easy project – you can have it finished in just a couple of hours, including paint and stain time. And, it only costs around $10 to make.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.

If you have a few 2X4s on hand, you can build so many wonderful things. Even if you don’t have any, they’re so cheap that you can justify driving to your local hardware store to pick up a few. I’ve even got a great workbench in here that you can make from those 2X4s to help you with your other woodworking projects. Some of these can also be made from reclaimed wood. I love reclaimed wood projects. Instead of throwing out those boards when you’re redoing cabinets or other renovations, you can turn them into new and exciting pieces for your home! If you’re into reclaimed wood projects, you should also check out these 40 eco-friendly reclaimed wood projects for the home.
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
This little cart won’t take you long to make and it will be a great table for the hallway. If you love the industrial look, this is a great way to incorporate it into your home for less. If you prefer something a bit more farmhouse style, you can change the hardware and give it more of a country rustic look. Once it’s finished, use wicker baskets to hold loads of items. This would also be a great bathroom cabinet for extra towels if you have the room.
If you’ve ever done a woodworking project, you know that there are going to be scrap pieces of wood left over. You can turn those scrap 2X4 pieces into these lovely candle holders that fit a tealight candle perfectly. Just cut your candle holders all to the same size, use a drill bit to create the hole for the tealight candle and then sand and stain. Or, you can leave them plain if you prefer that great rustic look.
[…] Easy woodworking projects diy ready. Want to try your skills in some easy woodworking projects? Whether you’re a beginner or an expert, you’ll find something to work on these wood craft ideas. Diy numbered wood slice coasters {easy sharpie. Create rusticchic numbered wood slice coasters with a simple stencilandsharpie method for decor and. 15 diy wood burning projects wood burning art. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy. Project gallery diy/crafts the happier. I love all these ideas but don’t have time to print them all. Do you by chance have a book of your crafts. Easy diy and crafts all about diy and crafts. The summer is already here, so where would you rather spend the rest of your hard day at work than at. 31 insanely easy and clever diy projects. Diy 31 insanely easy and clever diy projects. These are the kind of simple projects for the laziest and. 15 diy wood burning projects wood burning art diy ready. Add distinctive designs to a variety of barewood projects and get crafty with these 15 easy to make diy wood burning projects. Get into wood burning art. 15 creatively genius diy wood walls diy & crafts. These 15 themed wood walls are not only easy to diy, they’re relatively cheap. In fact, some of them may not cost you anything at all. How’s that for frugal? […]

Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Relax and enjoy your outdoor space with this DIY patio furniture consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit. Or you can buy store-bought ones and learn how to add ties to outdoor cushions here!

A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
×